Brontosaurus Dinosaur
Add this cute little bronto to your collection. Approximately 4.25 inches in length.
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Triceratop Dinosaur
Our little Triceratop is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
Stegosaurus Dinosaur
Our Stegasaurus is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
T- Rex Dinosaur
Our little T-Rex is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
Velocirapter Dinosaur
This cute Velociraptor is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the dinosaur.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
Dinosaur One
A 3d filament printing of a Dinosaur.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 9.54"
Thickness of print is .07"
These are all made by me and my 3D Printer using HueForge
Dinosaur One Bookmark
A 3D printed bookmark that is 2" x 7". You can order with tassel or no tassel.
Made with HueForge
Dinosaur Two Bookmark
A 3D printed bookmark that is 2" x 7". You can order with tassel or no tassel. Bookmarks with no tassels will be solid with no hole in them.
Made with HueForge
Dinosaur Two
A 3d filament printing of a Dinosaur.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 9.54"
Thickness of print is .07"
These are all made by me and my 3D Printer using HueForge
Mystery Dinosaur Egg
Which dinosaur will you get? That's part of the fun! These eggs are 2 1/2 inches tall. While the dinosaur will vary, the 4 small items and the scrolls are included in each egg. Each dinosaur egg come with a t-rex hammer to help you free your new friend.
The dinosaurs available currently are Velociraptor, Triceratop, Stegosaurus, T-Rex and a Brachiosaurus.
Please note that this product may contain small components and might not be suitable for very young children.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
If you are in California, Jefferson City, Sedalia, Columbia and surrounding areas we can work out a place to meet so you can pick up your item.
Shipping is a flat rate of $5.00. The more you order, the better the deal!
Authorized Seller for PrintyJay
Clickers and Fidgets
Bulldozer Clicker
Rev up the fun with this Bulldozer Clicker! Perfect for party favors, sensory play, or little construction lovers who like to keep their hands moving.
Not for children under 3.
Cement Mixer Clicker
Rev up the fun with this Cement Clicker! Perfect for party favors, sensory play, or little construction lovers who like to keep their hands moving.
Not for children under 3.
Forklift Clicker
Rev up the fun with this Forklift Clicker! Perfect for party favors, sensory play, or little construction lovers who like to keep their hands moving.
Not for children under 3.
Dump Truck with Ridges Clicker
Rev up the fun with this Dump Truck with Ridges Clicker! Perfect for party favors, sensory play, or little construction lovers who like to keep their hands moving.
Not for children under 3.
Dump Truck Clicker
Rev up the fun with this Dump Truck Clicker! Perfect for party favors, sensory play, or little construction lovers who like to keep their hands moving.
Not for children under 3.
Squishy Click Ball
Squishy Click Ball — squeeze it flat, hear the click, and watch it pop back into shape. A super satisfying fidget for busy hands.
Check here for filament colors
You can choose a solid color or a two tone color. Basic filament and Matte filament is the best choice. Silk will not work for these.
Approximately 1.5 inches
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Clicky Valentine Turtles
A tiny Valentine Turtle carrying a heart on its shell — sweet, sturdy, and perfect for gifting a little love or not so sweet.
Check here for filament colors
Hearts are red with black lettering.
Your turtles can be any color you want.
Wedding turtles can be a different color combination to customize them for your special event.
Approximately 2 inches
If the color you indicated is not in stock, I will find that color in a different brand.
Not intended for children under 3.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Buttered Waffle Clicker
Buttered Waffle Clicker — press for a crisp, satisfying click and a dash of breakfast‑themed joy. Cute, quirky, and perfect for fidget lovers.
Approximately 2.75 inches
Not intended for children under 3.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Summer Sun Fidget
Bring a little sunshine to your fingertips! ☀️ This Sun Hexagon Fidget takes the classic twist-and-pop design and cranks the brightness all the way up. As you twist, spin, and shift the layers, it creates a smooth, mesmerizing motion that feels like you’re rotating a tiny sun in your hands — no SPF required.
Approximately 2.75 inches
Not intended for children under 3.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Nuclear Symbol Octagon Fidget
Warning: this nuclear symbol octagon fission fidget may cause a chain reaction… of spinning. This mesmerizing octagon spiral fidget twists, twirls, pops, and rotates with satisfyingly smooth motion, creating a hypnotic ripple effect that’s almost radioactive (but, you know… safe). Perfect as a desk fidget, stress relief toy, or conversation-starting fidget.
Approximately 3.25 inches
Not intended for children under 3.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Earrings
Tulipan Earrings
Add a touch of spring to any day with these lightweight purple tulip earrings, 3D‑printed in durable PLA. Soft, floral, and easy to wear, they bring a gentle pop of color without weighing down your ears.
Perfect for garden lovers, flower fans, and anyone who wants a little bloom‑inspired charm.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Musical Note Earrings
Spring flowers!
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Flower Earrings
Spring flowers!
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Rose Bud Floral Earrings
Who doesn't love roses!
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Black Eyed Susans
Add a splash of color.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Heart Garden Earrings
You can't go wrong with flowers in a heart.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Geometric Trinity
You can't go wrong with flowers in a heart.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
I have a commercial license to produce Alex Rogojan designs. If you see something on his website that you would like me to make for you. Drop me a message with the design name.
Licensed design by Alex Rogojan, https://makerworld.com/@alex.rogojan
Victoria Cross Earrings
A detailed cross in rose gold filament.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Design by Layered Art 3D
Blossoms of Devotions
Inspired by flowers that bloom even in the gentlest light, these rose‑gold earrings capture the quiet strength of devotion.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Design by Layered Art 3D
Aretes Black Garden Heart
Flower Heart in a delicate light pink.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Design by Layered Art 3D
Wind Fury Earrings
Who can resist rose gold dragons.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Design by Layered Art 3D
Imperial Dahlia Earrings
Bloom with bold elegance in these Imperial Dahlia Earrings. Lightweight, detailed, and inspired by the regal beauty of dahlia petals, they add a striking floral touch to everyday outfits or special occasions.
Light weigt pla earrings. You no longer have to worry about heavy earrings pulling your ears down. All earrings are made to order so you can pick the wire color and the earring color.
Check here for filament colors
If you want the earrings as listed, put "as is" in color options
If the color you indicated is not in stock, I will find that color in a different brand.
Shipping is a flat rate $5.00 per order. The more you order, the more you save. Message me if you are within a 50 mile radius of California, MO I can arrange to meet you. Your $5 shipping charge will be refunded.
Design by Layered Art 3D
Sea Turtle Artic Whisper
Our little Artic Whisper Sea Turtle is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with Cinderwing3D
Ornate Dachshund
Multi colored Dachshund approximately 3.75 inches long.
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Authorized seller for Messy Panda
Sea Turtle Solar Breeze
Our little Solar Breeze Sea Turtle is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with Cinderwing3D
Cowboy Frog
Our little Cowboy Frog is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with Cinderwing3D
Raccoon
This little raccoon is so fun to play with. It is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the raccoon.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with MatMires
Opossum
This little guy is not playing dead today. It is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the opossum.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with MatMires
Heart Spider
A cute little spider approximately 2" long. He can lay flat, stand on all 8 legs or sit up. Anyway you put him he is adorable.
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Authorized seller for Cinderwing3D
Stegosaurus Dinosaur
Our Stegasaurus is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
T- Rex Dinosaur
Our little T-Rex is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
Triceratop Dinosaur
Our little Triceratop is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
Velocirapter Dinosaur
This cute Velociraptor is approximately 4" long. Multicolored and lots of personality!
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the dinosaur.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
We are an authorized seller with STLFLIX
Orchid Spider
A cute little spider approximately 2" long. He can lay flat, stand on all 8 legs or sit up. Anyway you put him he is adorable.
Please note that this product may contain small components and might not be suitable for very young children.
Given the characteristics of 3D printing, there is a potential for small components to detach if handled aggressively or dropped. Therefore, we advise against allowing younger children to interact with the item.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Authorized seller for Cinderwing3D
Octopus Wine Holder
This beautiful Wine Holder is hard to capture the shimmering colors. While it is a large piece, it is light weight and well balanced.
Definately will stand out at your next get together!
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Authorized seller for STLFLIX
AM & PM Pill Box
A morning and evening pill box with a Bird with hearts on the lid. 9.5" x 3.25"
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Carved Skull Egg #1
Rainbow egg printed in a multi-colored filament. Egg are approximately 3.5 inches tall. Colors may vary due to the multi-colored filament
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Authorized seller for Triple G Workshop
Carved Skull Egg #2
Rainbow egg printed in a multi-colored filament. Egg are approximately 3.5 inches tall. Colors may vary due to the multi-colored filament.
All of our 3d prints are made from PLA. While safe to handle, our products are not intended for young children. 3d prints are heat sensitive and can warp or distort if kept in high heat such as the car, outside or in direct sunlight.
Authorized seller for Triple G Workshop
Fall Floral Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Husky Pup Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Black Cat Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
On The Beach Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Sunflower With Bees
A 3D printed bookmark that is 2" x 7". You can order with tassel or no tassel.
Made with HueForge
Flowers With Music Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Romans 10:17 Bookmark
A 3D printed bookmark that is 2" x 7". You can order with tassel or no tassel.
Made with HueForge
Horse Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Moon Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Ocean Fish Bookmark
A 3D printed bookmark that is 2 3/8" x 7". You can order with tassel or no tassel.
Made with HueForge
Tiger Bookmark
A 3D printed bookmark that is 2" x 6". You can order with tassel or no tassel.
Made with HueForge
Halloween Shadow Box
A delightful addition to your Halloween decor. This shadow box comes with a variety of couples to choose from. The lights can be steady lights or blinking lights.
These are 8 & 3/4" Height & Width. 3 & 1/8" depth
Lights are battery operated and easy to change. (Batteries are included)
Please indicate if you want an orange background or a white background.
An active member to TechNerd patreon which allows me to sell this item
You won't be disappointed!.
Unicorn
A 3d filament printing of a unicorn.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 6.55" x 9.84
Thickness of print is .09"
These are all made by me and my 3D printer using HueForge
Abstract Owl
A 3d filament printing of a owl.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 9" x 9"
This is made by me and my 3D printer using HueForge
Sea Turtle
A 3d filament printing of a sea turtle.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .06"
This is made by me and my 3D printer using HueForge
Kraken Captain
A 3d filament printing of a Kraken Captain.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .08"
These are all made by me and my 3D Printer using HueForge
Octopus Framed
A 3d filament printing of a Octopus in a frame. An easel and command strips are also included.
Size of print is 7.87" x 9.06"
Thickness of print is .08"
This print is made by me and my 3D printer using HueForge
Sea Dragon Wind
A 3d filament printing of a Sea Dragon Wind.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .07"
These are all made by me and my 3D Printer using HueForge
Dinosaur One
A 3d filament printing of a Dinosaur.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 9.54"
Thickness of print is .07"
These are all made by me and my 3D Printer using HueForge
The Joy of the Lord
A 3d filament printing of a Nehemiah 8:10. An easel and command strips are also included.
Size of print is 5.78" x 8.10"
Thickness of print is .06"
This print is made by me and my 3D printer using HueForge
Dragon Face
A 3d filament printing of a dragons face.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .08"
This is made by me and my 3D printer using HueForge
Elephant
A 3d filament printing of a elephant.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .08"
This is made by me and my 3D printer using HueForge
Mouse Hole
A 3d filament printing of a mouse hole.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .07"
This is made by me and my 3D printer using HueForge
Hummingbird
A 3d filament printing of a hummingbird.
The picture, frame, easel and command strips are also included. The frame is a slide in frame so you can display it on the wall or on the shelf.
Size of print is 7.87" x 7.87"
Thickness of print is .06"
This is made by me and my 3D printer using HueForge
Personalized Picture
A 3d filament printing of a non copyrighted photo. An easel and command strips are also included.
By sharing a photo you acknowledge you have permission from the photographer for me to make this 3d print.
I will send you a picture of approximately what your finished product may look like. I will also let you know when your print may be ready. Since each prints takes a day to make, depending on orders will depend on how long the wait may be.
When you get back to me with the okay, I will print it.
Most of these photos were originally in color. I will convert your color photos to the correct colors to print.
Size of print varies with each picture.
MAKE SURE YOU UPLOAD YOUR PHOTO BEFORE CHECKING OUT!